The International Conference on Applied Mechanics and Mechanical Engineering

Author Index

A

A., ELBAZ S. EXPERIMENTAL INVESTIGATION OF THE EFFECT OF INJECTION ADVANCE ANGLE IN DIESEL ENGINE ON ENGINE SOUND [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
A., SHAHIN M. EXPERIMENTAL INVESTIGATION OF THE EFFECT OF INJECTION ADVANCE ANGLE IN DIESEL ENGINE ON ENGINE SOUND [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Abbass, Mohamed Laser-induced photoacoustic imaging for breast cancer detection using multivariate image analysis. [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Abdel-aziem, Nasser Frequency Response of 10 Degrees of Freedom Model For Vehicle Dynamics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Abdel-Fattah, M. BALLISTIC RESISTANCE OF WOVEN FABRIC COMPOSITES [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
Abdelhady, Salama A Three Dimensional-System of Units [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Abdel-Karim, M. Effect of elastic modulus variation during plastic deformation on simulations of uniaxial ratchetting [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Abd El-Wahab, H. S. Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Abdel-Wahed, M. A. BALLISTIC RESISTANCE OF SINGLE AND MULTI-LAYERED METALLIC TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Abdir, M. S. Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Abdul Aziz, Faieza Packaged Software Selection within Iranian Manufacturing SMEs: A Case Study [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
Abo El-Dahab, M. M, Finite Element Analysis of Fatigue Damage of Composite Laminated Structures under Stochastic Loading [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Abo_Elkhair, M. S. Bones adaptive loading mechanism [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Abo_Elkhair, M. S. Effect of Orthopaedic Stem Design on Femur Stress_Shielding [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
Abo_Elkhair, M. S. Computer Aided Engineering (CAE) Techniques Applied to Hip Implant [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Abo- El khier, M. Fatigue-Life Distributions and Failure Probability for Fiber- Reinforced Composite Beams [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Abo-Elnor, M. E. Bones adaptive loading mechanism [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Abo-Elnor, M. E. Effect of Orthopaedic Stem Design on Femur Stress_Shielding [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
Abo-Elnor, M. E. Computer Aided Engineering (CAE) Techniques Applied to Hip Implant [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Abou-Elela, H. A. NUMERICAL INVESTIGATION OF PROEJECTILE PENETRATION INTO CERAMIC/STEEL TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-21]
Abu-Alshaikh, I. Vibration of Fractionally Damped Beams Subjected to a Moving Harmonic Load [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Abuelezz, A. The Effect of Indenter Geometrical Errors on the Accuracy And Uncertainty of Brinell Hardness [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Abu-Mallouh, R. Vibration of Fractionally Damped Beams Subjected to a Moving Harmonic Load [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Afefy, I. H. Thermoeconomic Optimization for A Co-Generation Plant Based on Productive Structure Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
Afifi, Amal Local buckling of axially compressed fully and partially stiffened GRP short columns: A comparison of Experimental and FE Analysis [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Ahmed, Saad Dump combustor swirling flow reconstruction using neural network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Ajala, M. R. MODELING AND ANALYSIS OF ISOTROPIC AND ANISOTROPIC TIEMOSHENKO BEAMS USING FINITE ELEMENT TECHNIQUE [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
Alanbari, M. H. ROBUST CONTROLLER'S DESIGN FOR A FUEL INJECTION PUMP [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Albatlan, S. Abu alyazeed Experimental analysis and performance characteristics of air brake load sensing relay valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Allam, Elsayed E. Simulation of Solar Desalination System Operating at Reduced Pressure [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
Allam, Essam M. M. Evaluation of wind noise emitted from vehicle windows [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
Almazy, K. Aging response of Al-Zn-Mg 7020 alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Almazy, Kh. Experimental investigation of electron beam welding of AA1350 aluminum alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Alraiess, F. M. FINITE ELEMENT ANALYSIS OF ISOTROPIC AND ANISOTROPIC BEAMS USING A SIMPLE HIGHER ORDER SHEAR DEFORMATION THEORY [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
Aly, A. Abou El-Azm Effect of upstream throttle valve on static and dynamic characteristics of counterbalance valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-17]
Amici, Cinzia Measurement Techniques and Characterization of High Speed Moving Objects [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Angulo, Jaime ROBUST CONTROLLER'S DESIGN FOR A FUEL INJECTION PUMP [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Asfoor, M. Sh. Interactive Real-Time Driving Simulator For Vehicle Systems Design and Prototyping Process [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Atef, M. Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
Atwa, A. A. Effect of soil on the vibration and stability of buried composite material pipes conveying fluid [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Avello, Agustín Jiménez ROBUST CONTROLLER'S DESIGN FOR A FUEL INJECTION PUMP [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Awaad, M. Microstructural Evolution of porous biomorphous WC and SiC Ceramics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Awaad, M. NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Awaad, M. Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
AYDIN, Kadir Effect of hydroxy (HHO) gas addition on performance and exhaust emissions in compression ignition engines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]

B

Badia., Ahmed H. A. Computer aided design, optimization and performance enhancement of solid state laser cavities [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Bahei El- Deen, A. Fatigue-Life Distributions and Failure Probability for Fiber- Reinforced Composite Beams [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Baioumy, Sohier Mohamed Hussien Product Cost Estimation Using Fuzzy Logic [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Bakari, Mohamed J. Sensing Strategy for Multi-Arm Mobile Robot Navigation For Nuclear Decommissioning Tasks [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Barsoum, Fady F. Vibration control of tubular mono-poles using a novel concrete-steel composite design [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Bishay, Peter L. Finite Element and Spectral Element Models of an Adaptive Magnetorheological Sandwich Beam [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Bosila, Amr Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
Breda, Claudio Measurement Techniques and Characterization of High Speed Moving Objects [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]

C

Choi, Se-Young The Effect of Crystallization and Ion Exchange to the SLS Glass for High-Strength Transparent Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Choi, Se-Young A Study of High-Strength Borosilicate Glass by Crystallization and Ion Exchange for Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Ciric-Kostic, Snezana Gear Wear Accelerated testing Device with Reverse motion - Design and Application - [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]

D

Daidzic, Nihad E. The Model of Micro-Fluidic Pump with Vibrating Boundaries [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
DINESH, R. BIODIESEL FROM SEABUCKTHORN OIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Dovgy, Stanislav O. Performance Optimization of a Vertical Axis Wind Turbine With Mechanism of Blade Pitch Control [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]

E

El-Abbasy, Raoof Metallurgy of Cement-less T.H.R [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
El-Demerdash, S. M. Adaptive Tyre Pressure Control for Off-Road Vehicles [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
El-Dib, A. F. Thermoeconomic Optimization for A Co-Generation Plant Based on Productive Structure Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
Elhaddad, M. Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
Eliewa, A. Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
El Kadi, Hany Dump combustor swirling flow reconstruction using neural network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
El-Kherbawi, M. A. Microstructural Evolution of porous biomorphous WC and SiC Ceramics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Elmaihy, Aly Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
ElMaihy, A. A. Numerical Prediction of the Critical Velocity for Forced Ventilation Road Tunnel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
ElMaihy, A. A. Comparative Study of Point Supply/Exhaust Ventilation Systems of Road Tunnel using Numerical Simulation [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
Elnady, T. Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
El-Nady, A. M. Dynamic Analysis of Slider Crank mechanism and Two-Link Manipulator Using Constraint Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Elsayed, Kh. Modeling of the Gas and Particle Flow in the Cyclone Separator using LES, RANS and Mathematical Models [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
El- Sayed, Reda Prediction of Surface Roughness for Milling Operation Using Artificial Neural Network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Elseddig, Zuhair Agab Experimental investigation of electron beam welding of AA1350 aluminum alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
El-Shaer, Y. I. NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Elshafei, M. Adnan FINITE ELEMENT ANALYSIS OF ISOTROPIC AND ANISOTROPIC BEAMS USING A SIMPLE HIGHER ORDER SHEAR DEFORMATION THEORY [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
Elshafei, M. Adnan MODELING AND ANALYSIS OF ISOTROPIC AND ANISOTROPIC TIEMOSHENKO BEAMS USING FINITE ELEMENT TECHNIQUE [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
Elshamarka, S. E. Numerical Prediction of the Critical Velocity for Forced Ventilation Road Tunnel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Elshamarka, S. E. Comparative Study of Point Supply/Exhaust Ventilation Systems of Road Tunnel using Numerical Simulation [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
Elshamarka, Salman E. Simulation of Solar Desalination System Operating at Reduced Pressure [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
Elsharkawy, Yasser H. Laser-induced photoacoustic imaging for breast cancer detection using multivariate image analysis. [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
El-Sherbiny, M. The Effect of Indenter Geometrical Errors on the Accuracy And Uncertainty of Brinell Hardness [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Elsherif, I. A. Modeling of Hydro-gas Unit for Ground Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Elthalabawy, Waled Mohamed Solid-state diffusion enhancement of liquid phase joints between austenitic stainless steel alloy and magnesium alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
El-Zomor, H. M. Adaptive Tyre Pressure Control for Off-Road Vehicles [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Emam, M. A. Adaptive Tyre Pressure Control for Off-Road Vehicles [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]

F

F., Mandour, M. Computational Techniques for Calculation of Missile Aerodynamic Coefficients [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
Fam, Amir Vibration control of tubular mono-poles using a novel concrete-steel composite design [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Fayed, A. I. NUMERICAL INVESTIGATION OF PROEJECTILE PENETRATION INTO CERAMIC/STEEL TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-21]
Fayed, A. I. BALLISTIC RESISTANCE OF WOVEN FABRIC COMPOSITES [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
Fayed, A. I. NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Filippone, José Guillermo ROBUST CONTROLLER'S DESIGN FOR A FUEL INJECTION PUMP [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Forouzan, M. R. Dynamic Analysis of A Modified Truck Chassis [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
Fragassa, Cristiano Investigations of application of composite materials in packing machines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]

G

Gadallh, Mohamed H. Prediction of Surface Roughness for Milling Operation Using Artificial Neural Network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Gadelrab, R. M. Effect of soil on the vibration and stability of buried composite material pipes conveying fluid [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Ghali, Saeed. N. Low carbon high nitrogen stainless steel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Gharib, Mohamed Multiple Impacts in Rigid Bodies [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Ghobakhloo, Morteza Packaged Software Selection within Iranian Manufacturing SMEs: A Case Study [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
Ghoniemy, Samy A. Computer aided design, optimization and performance enhancement of solid state laser cavities [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Girgis, N. ELECTRONIC PREDICTION OF VEHICLE MOBILITY ON DEFORMABLE SOIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Gomaa, A. H. Thermoeconomic Optimization for A Co-Generation Plant Based on Productive Structure Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
Greil, P. Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]

H

Haggag, Essam Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
Hamada, A. A. Fatigue-Life Distributions and Failure Probability for Fiber- Reinforced Composite Beams [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Hammad, H. A. Modeling of Hydro-gas Unit for Ground Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Hassan, Galal Frequency Response of 10 Degrees of Freedom Model For Vehicle Dynamics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Hassan, I. Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Hegaze, Moutaz M. Dynamic Analysis of Slider Crank mechanism and Two-Link Manipulator Using Constraint Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Hegaze, Moutaz M. Finite Element Analysis of Fatigue Damage of Composite Laminated Structures under Stochastic Loading [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Hegazy, R. The Effect of Indenter Geometrical Errors on the Accuracy And Uncertainty of Brinell Hardness [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Hegazy, S. ELECTRONIC PREDICTION OF VEHICLE MOBILITY ON DEFORMABLE SOIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Hoseini, R. Dynamic Analysis of A Modified Truck Chassis [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
Hossain, MD Shakhawath The Model of Micro-Fluidic Pump with Vibrating Boundaries [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Hurmuzlu, Yildirim Multiple Impacts in Rigid Bodies [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Hussein, R. Reinforced Concrete Beam Sections Under Biaxial and Axial Force: An Exact Solution [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Hussein, R. Closed-Form Solution For Laminated Bio-composite Plates With Interlayer Slip [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Hussein, W. M. Laser-induced photoacoustic imaging for breast cancer detection using multivariate image analysis. [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Hussien, Hesham A. Feature recognition of prismatic parts for inspection planning [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]

I

Ibrahim, A. G. M. Numerical Prediction of the Critical Velocity for Forced Ventilation Road Tunnel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Ibrahim, A. G. M. Comparative Study of Point Supply/Exhaust Ventilation Systems of Road Tunnel using Numerical Simulation [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
Ibrahim, Ayman G. M. Simulation of Solar Desalination System Operating at Reduced Pressure [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
Ibrahim, Hesham Approximate Models for Crashworthiness Design Optimization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Ibrahim, M. The Effect of Indenter Geometrical Errors on the Accuracy And Uncertainty of Brinell Hardness [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Ibrahim, M. A. NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Ibrahim, Mohamed A. Utilizing Stabilized ZrO2 In Armor Applications [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
Ibrahim, S. S. Advanced Numerical and Experimental Studies of Premixed Flame Propagation Past Solid Obstructions [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]

K

K, Mahmoud, O. Computational Techniques for Calculation of Missile Aerodynamic Coefficients [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
Kadem, L. Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Kadkhodayan, M. Simulation and analysis of hot forging process for industrial locking gear elevators [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Karagiozova, D. Dynamic Snap-through of Thin-walled Spherical Shell under Impact [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Kenawy, S. H. Synthesis Aluminum Borate Ceramic [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Kenawy, S. H. Microstructural Evolution of porous biomorphous WC and SiC Ceramics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Kenawy, S. H. Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Khadour, N. S. Numerical Prediction of the Critical Velocity for Forced Ventilation Road Tunnel [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Khadour, N. S. Comparative Study of Point Supply/Exhaust Ventilation Systems of Road Tunnel using Numerical Simulation [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]
Khan, Tahir Irfan Solid-state diffusion enhancement of liquid phase joints between austenitic stainless steel alloy and magnesium alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Khodary, R. Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]
Kim, Hee-Jae The Effect of Crystallization and Ion Exchange to the SLS Glass for High-Strength Transparent Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Kossa, S. S. FINITE ELEMENT ANALYSIS OF ISOTROPIC AND ANISOTROPIC BEAMS USING A SIMPLE HIGHER ORDER SHEAR DEFORMATION THEORY [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
Kostic, Snezana Ciric Investigations of application of composite materials in packing machines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]

L

Lacor, C. Modeling of the Gas and Particle Flow in the Cyclone Separator using LES, RANS and Mathematical Models [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Lancini, Matteo Measurement Techniques and Characterization of High Speed Moving Objects [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Lebid, Oleksy G. Performance Optimization of a Vertical Axis Wind Turbine With Mechanism of Blade Pitch Control [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Lim, Jaemin The Effect of Crystallization and Ion Exchange to the SLS Glass for High-Strength Transparent Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Lim, Jaemin A Study of High-Strength Borosilicate Glass by Crystallization and Ion Exchange for Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Lucas, T. Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]

M

M, Abdalla, H. Computational Techniques for Calculation of Missile Aerodynamic Coefficients [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-19]
M., MAHGOUB H. EXPERIMENTAL INVESTIGATION OF THE EFFECT OF INJECTION ADVANCE ANGLE IN DIESEL ENGINE ON ENGINE SOUND [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Maalawi, Karam Y. Frequency optimization of functionally graded bars in axial motion [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Maarefdoust, M. Simulation and analysis of hot forging process for industrial locking gear elevators [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Mabrouk, Mohamed H. Path Planning of High Speed Manipulators according to Actuator Dynamics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
MABROUK, M. H. MULTI-AGENT SYSTEM PATH-PLANNING USING AGENT PERCEPTUAL MODEL AND DYNAMIC ARTIFICIAL POTENTIAL FIELDS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Maher, M. Aging response of Al-Zn-Mg 7020 alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Mahgoub, Hussien M. Path Planning of High Speed Manipulators according to Actuator Dynamics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Mansour, Mohy S. Computer aided design, optimization and performance enhancement of solid state laser cavities [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Medhat, A. Interactive Real-Time Driving Simulator For Vehicle Systems Design and Prototyping Process [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Mekawy, Gehan Technology of Short Stem T.H.R [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
Memon, Ashfaque Ahmed DIRECT METHOD FOR THE ESTIMATION OF GRAIN SIZE MEASUREMENT [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Metwally, M. Effect of upstream throttle valve on static and dynamic characteristics of counterbalance valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-17]
Morgan, E. I. Imam Dynamic Analysis of Slider Crank mechanism and Two-Link Manipulator Using Constraint Technique [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Murrenhoff, H. Research on Series Hydraulic Hybrid Drivetrain for Using in Automobile [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]

N

Naga, S. M. Microstructural Evolution of porous biomorphous WC and SiC Ceramics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Naga, S. M. NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Naga, S. M. Synthesis and Characterization of Laminated Si/SiC Composites [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Naga, Salma Preparation and Characterization of Mullite Fiber Reinforced Alumina Matrix. [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
Negm, Hani M. Finite Element and Spectral Element Models of an Adaptive Magnetorheological Sandwich Beam [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]

O

Ognjanovic, Milosav Gear Wear Accelerated testing Device with Reverse motion - Design and Application - [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Ooi, KT Inception of the Revolving Vane Compressor [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]

P

Palanivasan, R. Optimizing Influence of Process Parameters on Induction Hardening for IC Engine Valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
Pavlovic, Ana Investigations of application of composite materials in packing machines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Pavlovic, Ana Gear Wear Accelerated testing Device with Reverse motion - Design and Application - [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Putrasari, Yanuandri Effect of pretreatment using ultrasonic technique with Sic or Al2O3 on high temperature oxidation behavior of the FeCrAl [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]

R

Rabeeh, Bakr Mohamed Engineering Of Hybrid Composite/ Intermetallic Al-Fe-Si Fibers For Structural Materials Applications [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Rabeeh, Bakr Mohamed Macroscopic and Microscopic Aspects Observed in Composite Processing For Shape Memory Alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Rabeih, E. Effect of soil on the vibration and stability of buried composite material pipes conveying fluid [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Radi, A. E. Bones adaptive loading mechanism [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Radi, A. E. Effect of Orthopaedic Stem Design on Femur Stress_Shielding [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]
Radi, A. E. Computer Aided Engineering (CAE) Techniques Applied to Hip Implant [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Radi, Ahmed Emad-Eldin Tribology of Short Stem Total Hip Replacement (T.H.R) [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
Ragheb, H. ELECTRONIC PREDICTION OF VEHICLE MOBILITY ON DEFORMABLE SOIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Ragheb, M. Vibrational Response of Tracked Vehicles with Variable Suspension Characteristics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Rashad, Ahmed Mohamed Experimental Study on a Diesel Engine Fuelled with New and Used Cooking Oil Methyl Ester [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Rasmy, Mohamed H. Prediction of Surface Roughness for Milling Operation Using Artificial Neural Network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Riad, A. M. MODELING AND ANALYSIS OF ISOTROPIC AND ANISOTROPIC TIEMOSHENKO BEAMS USING FINITE ELEMENT TECHNIQUE [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-28]
Riad, A. M. BALLISTIC RESISTANCE OF SINGLE AND MULTI-LAYERED METALLIC TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Riad, A. M. NUMERICAL INVESTIGATION OF PROEJECTILE PENETRATION INTO CERAMIC/STEEL TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-21]
Riad, A. M. BALLISTIC RESISTANCE OF WOVEN FABRIC COMPOSITES [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-18]

S

Sabra, M. Aging response of Al-Zn-Mg 7020 alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Saleh, Ibrahem Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
Saleh, Mahmoud A. Technology of Production and Testing of Composite Armour Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
Saleh, W. Film cooling performance of shaped hole over vane with flow visualization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Salem, A. M. BALLISTIC RESISTANCE OF SINGLE AND MULTI-LAYERED METALLIC TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Salem, A. M. Modeling of Hydro-gas Unit for Ground Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Salem, A. M. Vibrational Response of Tracked Vehicles with Variable Suspension Characteristics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Salem, A. M. Modeling and Simulation of Tracked Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Sallam, M. T. Experimental investigation of electron beam welding of AA1350 aluminum alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Sallam, M. Aging response of Al-Zn-Mg 7020 alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-13]
Sebayang, Darwin Effect of pretreatment using ultrasonic technique with Sic or Al2O3 on high temperature oxidation behavior of the FeCrAl [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Sedaghati, Ramin Approximate Models for Crashworthiness Design Optimization [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Serry, Mohamed A. Refractory Ceramics and their Industrial Applications [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-1]
Shaaban, S. M. Adaptive Tyre Pressure Control for Off-Road Vehicles [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Shahien, Moatasem Experimental Investigation of Cyclic & Cylinder to Cylinder Variations in Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-20]
Sharaf, A. M. Interactive Real-Time Driving Simulator For Vehicle Systems Design and Prototyping Process [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Shehata, M. S. Cylinder Pressure, Performance Parameters, Heat Release, Specific Heats Ratio and Duration of Combustion for Spark Ignition Engine [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-26]
SHEHATA, M. S. COTTON, PALM AND FLAX OILS AS ALTERNATIVE FUELS FOR DIESEL ENGINE [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-25]
Shim, Gyu-In The Effect of Crystallization and Ion Exchange to the SLS Glass for High-Strength Transparent Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Shim, Gyu-In A Study of High-Strength Borosilicate Glass by Crystallization and Ion Exchange for Bulletproof Materials [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Shoukrey, Mohamed K. Feature recognition of prismatic parts for inspection planning [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Sobih, M. Experimental investigation of electron beam welding of AA1350 aluminum alloy [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Soh, A. K. Phase field simulation of ferroelectrics with defect [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Sokar, Ibrahim- Research on Series Hydraulic Hybrid Drivetrain for Using in Automobile [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Soliman, Omar S. Prediction of Surface Roughness for Milling Operation Using Artificial Neural Network [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Soskic, Zlatan Investigations of application of composite materials in packing machines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]

T

Tawfik, Mohammad Finite Element and Spectral Element Models of an Adaptive Magnetorheological Sandwich Beam [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Turvey, Geoffery Local buckling of axially compressed fully and partially stiffened GRP short columns: A comparison of Experimental and FE Analysis [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]

U

ULUDAMAR, Erinç Effect of hydroxy (HHO) gas addition on performance and exhaust emissions in compression ignition engines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Untoro, Pudji Effect of pretreatment using ultrasonic technique with Sic or Al2O3 on high temperature oxidation behavior of the FeCrAl [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]

V

VARUN SHANKAR, S. S. BIODIESEL FROM SEABUCKTHORN OIL [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
VESELINOVA-GUTEVA, Varvara COEFFICIENT OF SENSITIVENESS TO A REGISTERED CROSS-SYMMETRIC CRACK AT STABILITY OF A SLENDER PRISMATIC COLUMN [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]

W

Warkhedkar, Ravi. M. Optimizing Influence of Process Parameters on Induction Hardening for IC Engine Valve [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-7]

Y

YILMAZ, Ali Can Effect of hydroxy (HHO) gas addition on performance and exhaust emissions in compression ignition engines [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Younes, M. M. NEW TRENDS IN CERAMIC PROCESSING FOR ARMOR APPLICATIONS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Youssef, Amro M. Feature recognition of prismatic parts for inspection planning [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Youssef, Amro M. Computer aided design, optimization and performance enhancement of solid state laser cavities [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-9]
Yu, T. X. Dynamic Snap-through of Thin-walled Spherical Shell under Impact [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]

Z

Zhang, X. W. Dynamic Snap-through of Thin-walled Spherical Shell under Impact [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-14]
Zhang, Yi Vibration control of tubular mono-poles using a novel concrete-steel composite design [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Zhao, X. F. Phase field simulation of ferroelectrics with defect [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-10]
Zidan, A. S. BALLISTIC RESISTANCE OF SINGLE AND MULTI-LAYERED METALLIC TARGETS [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-15]
Zidan, A. M. Modeling of Hydro-gas Unit for Ground Vehicles Suspension [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-8]
Zidan, A. Vibrational Response of Tracked Vehicles with Variable Suspension Characteristics [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-12]
Zied, Khaled M. Sensing Strategy for Multi-Arm Mobile Robot Navigation For Nuclear Decommissioning Tasks [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-11]
Zulkifli, Norzima Binti Packaged Software Selection within Iranian Manufacturing SMEs: A Case Study [Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, Pages 1-16]